Extrudr PETG CF
Összehasonlít
XPETG CF has been developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is certified according to REACH and RoHS standards. PETG is flame retardant according to UL 94 with a wall thickness of 3.2 mm. Features:
Carbon composite material for performance applications
Excellent mechanical properties
High chemical resistance
Low warping
Low shrinking
Printing recommendation:
Nozzle 220-250°C
Heatbed 60-90°C
Adhesive not required
Speed 20-200mm/s
Cooling 20-50%
Enclosed Space for larger components
| Filament típus: | PETG |
| Vizuális megjelenés: | Matt |
| Nyomtatás nehézsége: | Könnyű |
| Edzett fúvóka: | igen |
| Zárt nyomtatótér: | igen |
| Réteg tapadás (subjective): | Jó |
| Max. nyomtatási sebesség (mm/s): | <200 mm/s |
| Zsugorodás (nyomtatás alatt): | Kicsi (<0,5%) |
| Anyag Sűrűség: | 1,29 g/cccm |
| Max. Térfogat sebesség: | 10 mm3/s |
| MFR - Max Áramlási Ráta: | Alacsony (<10 g/10min) |
| HDT - Hőállóság: | Gyenge (<80 C) |
| Max. Működési Hő: | 68 ˚C |
| Kémiai anyagokkal szembeni ellenállóság: | PETG CF exhibits good chemical resistance to oils, acids, and alkalis, but is less resistant than crystalline PET-CF under aggressive chemical or high-temperature conditions. Due to CF content it allows to some chemical material to diffuse through its pol |
| Megnyúlás, mielőtt törik: | Közepes (5%< - <10%) |
| Max. Erő a Meghajlásig: | 51 - 60 MPa |
| Hajlítási rugalmasság (merevség): | 3000 - 3499 MPa |
| Max. Húzószilárdság: | 51 - 60 MPa |
| Ütésállóság: | <10 kJ/m2 |
| UL94 - láng álló műanyag (V0- legszigorúbb): | v2 |
| ESD - Elektroszatikus védelem: | nem |
| FDA - Élelmiszer Biztonsági Tanusítvány: | nem |
| Toy - Megfelel a EU Játék gyártási előírásainak: | nem |
| RoHS - Veszélyes Anyag tarlalom (2011/65/EU): | igen |
| REACH - Veszélyes Kémiai anyag tartalom (EC No 1907/2006): | igen |