FilamentPM TPU - Medium
Compare
| : | Flex: TPE / TPU |
| Visual outlook of surface: | Bright |
| Printing difficulty: | Easy |
| Hardened nozzle: | no |
| Enclosed space: | no |
| Layer adhesion (subjective): | Acceptable |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Low (< 0,5%) |
| Density: | 1,15 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | Low (<10 g/10min) |
| HDT - Heat Distortion: | Good (100 C< - <140 C) |
| Max. Service Temp: | 123°C |
| Chemical resistance: | TPUs' chemical-resistant is available in polyester, polyether, and polycaprolactone grades, each offering varying resistance to acids, bases, oils, solvents, and other chemicals. Resist biodiesel, gas/ethanol mixtures and other solvents. |
| Elongation at break: | Rubber like (300%<; <500%) |
| Max. Flexural Strength: | not available |
| Flexural Modulus (stiffness): | 1000 - 1499 MPa |
| Stress at break: | 31 - 40 MPa |
| Impact strength: | not available |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | no |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |