FilamentPM TPE - Medium
Compare
This is a very popular material that no maker should definitely miss.
The use of this material is very wide and it is up to you and your creativity how well you use this special filament. It is suitable, for example, for printing keychains, covers for mobile phones, tires for RC cars and possibly other parts that are designed to be impact resistant.
Printing recommendation:
Nozzle 220 - 240 °C
Heatbed 0 °C
Cooling 30-50%
for a better adhesion printing is recommended use glue MAGIGOO PP
excellently printable
| : | Flex: TPE / TPU |
| Visual outlook of surface: | Matte |
| Printing difficulty: | |
| Hardened nozzle: | no |
| Enclosed space: | no |
| Layer adhesion (subjective): | Good |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Low (< 0,5%) |
| Density: | 1,10 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | Low (<10 g/10min) |
| HDT - Heat Distortion: | Medium (80 C< - <100 C) |
| Max. Service Temp: | 100 °C |
| Chemical resistance: | TPE exhibits varying degrees of chemical resistance depending on their formulation, with some grades showing excellent resistance to water and a wide range of chemicals, while others may degrade upon exposure to certain solvents. TPEs offer versatile chem |
| Elongation at break: | Elastic (500%<) |
| Max. Flexural Strength: | not available |
| Flexural Modulus (stiffness): | not available |
| Stress at break: | <30 MPa |
| Impact strength: | 41 - 50 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | no |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |