FilamentPM PP
Compare
PPJet (polypropylene)- technical plastic of common use, high chemical resistance to acids, alkalis, oils, salts, water, etc. and one of the most used plastics in various industries, suitable for prototyping and property testing It has low density, so light it can float on the water.
Also it is highly tough and flexible material, has high layer adhesion, therefore is extremely impact resistant. Heat resistance (up to 100 °C)
It can be used to health industry harmlessly.
Printing recommendation:
Nozzle: 210 - 230 °C
Heatbed: 80 - 100 °C
Closed chamber recommended
fan speed: 100%
for a better adhesion using the MAGIGOO PP glue or printing on an office PP tape
for the bigger object we recommend using function brim - 5 mm
| : | PP |
| Visual outlook of surface: | Bright |
| Printing difficulty: | |
| Hardened nozzle: | no |
| Enclosed space: | yes |
| Layer adhesion (subjective): | Bad, need attention to |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Medium (1% < - <3%) |
| Density: | 0,89 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | Low (<10 g/10min) |
| HDT - Heat Distortion: | Medium (80 C< - <100 C) |
| Max. Service Temp: | 100 °C |
| Chemical resistance: | PP exhibits good chemical resistance to a variety of substances, making it suitable for many applications, particularly in environments involving acids, bases, and organic solvents. PP has superior resistance to sulfur-bearing compounds and is capable of |
| Elongation at break: | not available |
| Max. Flexural Strength: | not available |
| Flexural Modulus (stiffness): | not available |
| Stress at break: | <30 MPa |
| Impact strength: | not available |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | yes, but no cert. |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |