Extrudr PLA - Wood
Compare
| : | PLA |
| Visual outlook of surface: | Matte |
| Printing difficulty: | Easy |
| Hardened nozzle: | no |
| Enclosed space: | no |
| Layer adhesion (subjective): | Excellent |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Low (< 0,5%) |
| Density: | 1,24 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | High (20 g/10min <) |
| HDT - Heat Distortion: | Low (<80 C) |
| Max. Service Temp: | 48 °C |
| Chemical resistance: | not available |
| Elongation at break: | Small (<5%) |
| Max. Flexural Strength: | 41 - 50 MPa |
| Flexural Modulus (stiffness): | 3000 - 3499 MPa |
| Stress at break: | 41 - 50 MPa |
| Impact strength: | <10 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | yes |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |