Bambu PLA
With Bambu's exclusive fine-turned formulation based on 3D printing expertise and fine-turned settings, Bambu PLA Basic delivers stronger layer adhesion, enhanced impact resistance, and long-lasting durability compared to other standard PLA filaments on the market. Additionally, it reaches a print speed up to 258mm/s*, cutting your printing time without compromising quality.
Printing recommendation:
Drying Settings before Printing 50 °C，8 h
Printing and Storage Humidity < 20% RH (Sealed with desiccant)
Nozzle Temperature 190 - 230 °C
Bed Temperature 35 - 45 °C
Cooling Fan Turn on
Printing Speed < 300 mm/s
Water absorption rate 0,43%
| : | PLA |
| Visual outlook of surface: | Bright |
| Printing difficulty: | Easy |
| Hardened nozzle: | no |
| Enclosed space: | no |
| Layer adhesion (subjective): | Excellent |
| Max. Print Speed (mm/s): | 200 mm/s < - <400 mm/s |
| Shrinking (during printing): | Low (< 0,5%) |
| Density: | 1,24 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | High (20 g/10min <) |
| HDT - Heat Distortion: | Low (<80 C) |
| Max. Service Temp: | 55 °C |
| Chemical resistance: | exhibits high resistance to water, salts and oils, but it has limited resistance to strong acids and bases. |
| Elongation at break: | Big (10%<; <50%) |
| Max. Flexural Strength: | 61 - 70 MPa |
| Flexural Modulus (stiffness): | 2500 - 2999 MPa |
| Stress at break: | 31 - 40 MPa |
| Impact strength: | 21 - 30 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | yes, but no cert. |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |