Bambu PETG
Compare
The all-new Bambu Lab PETG Basic has been upgraded to deliver PLA-level strength while maintaining its signature toughness. This makes it ideal for structural and functional parts that need to handle higher stress without becoming brittle. With improved resistance to water, UV, and temperature, it remains an excellent choice for outdoor accessories, functional tools, and everyday-use models. The refined formulation also improves printability by reducing stringing and producing smoother surface finishes, so you get the benefits of PETG with fewer tradeoffs.
The all-new Bambu Lab PETG Basic shows reduced stringing thanks to its lower sensitivity to moisture compared to typical PETG filaments, resulting in smoother surfaces and crisper details.
Printing recommendation:
Nozzle Temperature 230 - 260 °C
Bed Temperature 65 - 75 °C
Cooling fan 0 - 60%
Printing Speed < 200 mm/s
Water absorption rate - 0,45%
| : | PETG |
| Visual outlook of surface: | Bright |
| Printing difficulty: | Easy |
| Hardened nozzle: | no |
| Enclosed space: | no |
| Layer adhesion (subjective): | Excellent |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Low (< 0,5%) |
| Density: | 1,26 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | High (20 g/10min <) |
| HDT - Heat Distortion: | Low (<80 C) |
| Max. Service Temp: | 70 °C |
| Chemical resistance: | exhibits strong chemical resistance to many acids, alcohols, and cleaning agents, but can be vulnerable to strong alkalis, aromatic hydrocarbons, and prolonged exposure under stress or high temperatures |
| Elongation at break: | Medium (5%< - <10%) |
| Max. Flexural Strength: | 71 - 80 MPa |
| Flexural Modulus (stiffness): | 1500 - 1999 MPa |
| Stress at break: | 41 - 50 MPa |
| Impact strength: | 51 - 60 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | yes, but no cert. |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |