Bambu ASA LW
Additionally, it boasts extraordinary resistance to temperature, water, and UV rays. With these unique properties, it is ideal for printing long-lasting outdoor models and weight-sensitive projects, such as RC planes.
Only 50%-75% the density of regular ASA prints, ASA Aero is as light as feather, designed for weight-sensitive objects
Compared with other foaming filament, ASA Aero is tougher with higher layer strength, making it more resistant to impact, collision, and falling, perfect for high-stress demanding applications.
With controllable foaming characteristic, ASA Aero achieves lower density of prints by increasing printing temperature or lowering flow rate.
Printing recommendation:
Drying Settings (Blast Drying Oven) 80 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 280 °C
Bed Temperature (with Glue) 80 - 90 °C
Printing Speed < 150 mm/s
Flow rate ratio 0,45 - 0,8
Foaming rate 0 - 110%
Volumetric expension ratio 100% - 210%
Print density 0.46 ~ 0.97 g/cm³
| : | ASA |
| Visual outlook of surface: | Matte |
| Printing difficulty: | Tapasztalatot igényel |
| Hardened nozzle: | no |
| Enclosed space: | yes |
| Layer adhesion (subjective): | Bad, need attention to |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Medium (1% < - <3%) |
| Density: | not available |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | Low (<10 g/10min) |
| HDT - Heat Distortion: | Medium (80 C< - <100 C) |
| Max. Service Temp: | 85 °C |
| Chemical resistance: | ASA is significantly more resistant than ABS, especially to alcohols and many cleaning agents. ASA can be solvent-welded, using e.g. cyclohexane, dichloroethane, methylene chloride, or butanone. |
| Elongation at break: | Medium (5%< - <10%) |
| Max. Flexural Strength: | 51 - 60 MPa |
| Flexural Modulus (stiffness): | 1500 - 1999 MPa |
| Stress at break: | 31 - 40 MPa |
| Impact strength: | 31 - 40 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | no |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |