Bambu ABS GF
Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.
Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.
Printing recommendation:
Drying Settings (Blast Drying Oven) 80 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with Glue) 80 - 100 °C
Chamber Temperature 45- 60°C
Printing Speed < 180 mm/s
| : | ABS |
| Visual outlook of surface: | Matte |
| Printing difficulty: | |
| Hardened nozzle: | yes |
| Enclosed space: | yes |
| Layer adhesion (subjective): | Acceptable |
| Max. Print Speed (mm/s): | <200 mm/s |
| Shrinking (during printing): | Medium (1% < - <3%) |
| Density: | 1.08 g/cccm |
| Max. Volumetric Speed: | not available |
| MFR - Melt Flow Rate: | Low (<10 g/10min) |
| HDT - Heat Distortion: | Medium (80 C< - <100 C) |
| Max. Service Temp: | 100 °C |
| Chemical resistance: | ABS exhibits good chemical resistance to many acids(e.g., acetic acid, hydrochloric acid at low concentrations), alkalis(e.g., sodium hydroxide, potassium hydroxide), and alcohols(e.g., ethanol, isopropanol). BUT can be attacked by strong oxidizers, keton |
| Elongation at break: | Medium (5%< - <10%) |
| Max. Flexural Strength: | 61 - 70 MPa |
| Flexural Modulus (stiffness): | 2500 - 2999 MPa |
| Stress at break: | 31 - 40 MPa |
| Impact strength: | 11 - 20 kJ/m2 |
| UL94 complaint (V0- strictest): | no |
| ESD - Electrostatic Discharge: | no |
| FDA compliant: | no |
| Toy Safe compliant (EC No 1272/2008): | no |
| RoHS compliant (2011/65/EU): | yes |
| REACH compliant (EC No 1907/2006): | yes |